Easton 5MM FMJ MAX Match Grade 340 Arrow Shafts 12-Pack

The Easton 5MM FMJ MAX Match Grade 340 shafts provide a precise, customizable foundation for building hunting arrows around a compound-bow setup. This package contains 12 unfletched shafts at their full 32-inch stock length, allowing each one to be cut, assembled and fletched according to the archer’s required finished length and component configuration. The 340 spine is measured at 0.340-inch deflection, while the shaft’s published weight of 9.8 grains per inch offers a balance between manageable arrow mass and useful downrange speed. Easton constructs the FMJ MAX with its seamless Acu-Carbon core surrounded by a precision 7075-alloy aluminum jacket. This carbon-and-metal design delivers the uniformity needed for accurate arrow building while maintaining the familiar Full Metal Jacket configuration preferred by many bowhunters. Its 5mm format has a 0.204-inch inside diameter and a 0.261-inch outside diameter, creating a small-diameter hunting shaft that can help limit wind exposure and reduce resistance as the arrow passes through a target. Match Grade sorting provides a straightness tolerance of plus or minus 0.001 inch for consistency across the dozen. Each shaft has Easton’s hard-anodized olive-drab green diamond-plate finish and comes with a 5MM Microlite nock installed. The compact nock design uses shorter ears and an updated throat geometry intended to support clean string fit and practical bow tuning. The package also includes 16-grain 5MM HIT inserts with standard 8-32 threads and correctly sized Match Grade HIT collars, giving the arrow builder the core front-end components needed for this shaft configuration. The 340-spine version is sized for 17/64-inch field-point outside diameters. These are bare, unfletched shafts rather than ready-to-shoot arrows, so final cutting, component installation, fletching and point selection must be completed for the individual bow and intended hunting setup. The shafts are manufactured in the USA.

Specifications and Features:

• 12 unfletched hunting arrow shafts
• 340 spine with 0.340-inch deflection
• 32-inch uncut stock length
• 9.8 grains per inch shaft weight
• 0.204-inch inside diameter; 0.261-inch outside diameter
• Acu-Carbon core with 7075-alloy aluminum jacket
• OD green hard-anodized diamond-plate finish
• Straightness tolerance: ±0.001 inch
• Pre-installed 5MM Microlite nocks
• 5MM HIT 8-32 inserts and Match Grade HIT collars included
• Recommended field point diameter: 17/64 inch
• Made in the USA
• Brand: Easton
• Series: 5MM FMJ MAX Match Grade
• Product Type: Arrow Shafts
• Manufacturer Part Number: 401210
• UPC: 723560012107