-
LEE PRECISION
LEE 90251 BENCH PLATE
$34.99Lee Bench Plate allows for quick press removal without unbolting from bench. Includes 1 steel base block that fits all current Lee metallic presses. Special elevator bolt hardware included. Powder...
-
LEE PRECISION
LEE 90215 PRIMING TOOL KIT W/ BOX (8 PRIMING TOOL SHELL HOLDERS INCLUDED)
$40.99Includes the New Auto-Prime and nice molded storage box. Holds everything including a complete set of shell holders. This kit comes with 8 of the most popular priming tool shell holders, works with...
-
LEE PRECISION
LEE 90205 PRIMING TOOL SHELL HOLDER #5
$4.99Lee #5 Priming Tool shell holder used in Lee priming tools.
-
LEE PRECISION
LEE 90860 CARBIDE FACTORY CRIMP DIE 9MM LUGER
$24.99Lee 9MM LUGER Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a taper crimp. The...
-
LEE PRECISION
LEE 90101 PRIMER POCKET CLEANER (BOTH LG & SM)
$4.99Lee Primer Pocket Cleaners double ended design cleans both large and small primer pockets so that primers can be fully seated for better accuracy and safety.
-
LEE PRECISION
LEE 90124 CASE LENGTH GAUGE & SHELL HOLDER 25-06 REMINGTON
$7.99Lee 25/06 REM Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.474 to 2.494 inches.Specifications...
-
LEE PRECISION
LEE 90534 7/8-14 SPLINE DRIVE LOCK RINGS (3 PACK)
$5.99Lee Billet Aluminum Lock Rings are easy to adjust, just finger tighten, holds the adjustment rock solid. Package of 3
-
LEE PRECISION
LEE 90110 CUTTER & LOCK STUD
$7.99Use the Lee Cutter and Lock Stud with the Case Length Gauge & Shell Holder to trim cases. Can be used by hand or with an electric drill. Works on all brass less than .475 base diameter. If you are...
-
LEE PRECISION
LEE 90521 PRESS SHELL HOLDER #4
$5.99Lee R4 Universal shell holder used in most brands of reloading presses.
-
LEE PRECISION
LEE 90292 DECAPPING DIE
$15.99An absolute must for those who clean cases before reloading. Cases need not be clean nor lubed when using this die. Cases are not sized at all, only deprimed. Works on boxer-primed brass only. Fits...
-
LEE PRECISION
LEE 90269 4 HOLE TURRET (ONLY)
$13.99Lee Aluminum 4-Hole Turret for quick caliber change for the 4-Hole Turret Press and Classic Turret Press. This 4 Hole Turret will not fit inside the Pro 1000 or now discontinued 3-Hole Turret Press.
-
LEE PRECISION
LEE 90182 VERY LTD 4 DIE 450 BUSHMASTER SET
$54.99Lee Very Limited Production 450 Bushmaster PaceSetter 4-Die Set includes a Full Length Sizing Die, Powder Through Expanding Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die,...
-
LEE PRECISION
LEE 90111 CASE LENGTH GAUGE & SHELL HOLDER 22 HORNET
$7.99Lee 22 HORNET Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.383 to 1.403 inches.
-
LEE PRECISION
LEE 90103 22 CAL. DECAPPER AND BASE
$7.99Lee Easily removes crimped in primers from military cases
-
LEE PRECISION
LEE 90105 223 DECAPPER
$4.99Replacement for DECAPPER & BASE .22 CALIBER (Part # 90103)
-
LEE PRECISION
LEE 90230 NEW AUTO-PRIME
$29.99The original and world's most popular hand-held priming tool. Fast and economical hand held priming with unmatched feel and accuracy. Lee New Auto Prime uses inexpensive Lee Hand Prime shell holders...
-
LEE PRECISION
LEE 90085 QUICK TRIM DIE 38 SPECIAL
$14.9938 SPL QUICK TRIM DIESpecifications and Features: When using a LEE Quick Trim Die you need to have one of the following, a LEE Deluxe Quick Trim Case Trimmer # 90437, LEE Value Trim # 90386 or a LEE...
-
LEE PRECISION
LEE 90131 CASE LENGTH GAUGE & SHELL HOLDER 7MM REMINGTON MAGNUM
$7.99Lee 7MM REM MAG Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim Trim to length 2.480 to 2.500 inches...
-
LEE PRECISION
LEE 90001 PRESS SHELL HOLDER #14
$5.99Lee R14 Universal shell holder used in most brands of reloading presses.
-
LEE PRECISION
LEE 90142 CASE LENGTH GAUGE & SHELL HOLDER 300 WIN MAG
$7.99Lee 300 WIN MAG Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.600 to 2.620 inches...
-
LEE PRECISION
LEE 90249 QUICK TRIM DIE 30-30 (30 WCF) WINCHESTER
$14.9930/30 WINCHESTER QUICK TRIM DIESpecifications and Features: When using a LEE Quick Trim Die you need to have one of the following, a LEE Deluxe Quick Trim Case Trimmer # 90437, LEE Value Trim # 90386...
-
LEE PRECISION
LEE 90161 CASE LENGTH GAUGE & SHELL HOLDER 44 MAGNUM
$7.99Lee 44 MAG Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.265 to 1.285 inches.Specifications...
-
LEE PRECISION
LEE 90200 PRIMING TOOL SHELL HOLDER #16
$4.99Lee #16 Priming Tool shell holder used in Lee priming tools.
-
LEE PRECISION
LEE 90190 POWDER FUNNEL FITS .22 - .45 CALIBER CASES
$4.99Lee Powder Funnel is a large, unbreakable funnel that fits all cases from 22 to 45 caliberSpecifications and Features: Fits all cases .22 to .45 caliber Flange hole Mounts to Lee turret press, shelf,...
-
LEE PRECISION
LEE 90196 PRIMING TOOL SHELL HOLDER STORAGE BOX (HOLDERS NOT INCLUDED)
$5.99Lee Shell Holder Set Box, holds 12 Priming Tool Shell Holders for easy storage
-
LEE PRECISION
LEE 90213 PRIMING TOOL SHELL HOLDER #13
$4.99Lee #13 Priming Tool shell holder used in Lee priming tools.
-
LEE PRECISION
LEE 90128 CASE LENGTH GAUGE & SHELL HOLDER 270 WINCHESTER
$7.99Lee 270 WIN Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim Trim to length 2.520 to 2.540 inches.Specifications...
-
LEE PRECISION
LEE 90102 30 CAL. DECAPPER AND BASE
$7.99Lee Easily removes crimped in primers from military cases
-
LEE PRECISION
LEE 90126 CASE LENGTH GAUGE & SHELL HOLDER 6.5X55 SWEDISH MAUSER
$7.99Lee 6.5X55 SWED case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.145 to 2.165 inches...
-
LEE PRECISION
LEE 90786 TAPER CRIMP DIE 45 COLT
$12.99Lee 45 Colt/454 Casull Taper Crimp Die, overcomes crimp problems caused by poor die design. Offers little or no advantage when used with 1986 or newer Lee Dies as the crimp angle is already a...
-
LEE PRECISION
LEE 90600 BREECH LOCK BUSHING 2-PK
$14.99Pack of (2) Breech Lock Quick Change Bushings. Allows instant, accurate die changes. Perfect with Lee Lock Rings
-
LEE PRECISION
LEE 90861 CARBIDE FACTORY CRIMP DIE 38 SPECIAL & 357 REM MAGNUM
$24.99Lee 38 Special/357 Magnum/357 MAX Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a...
Most Orders Placed Before 1pm EST Ship Same Day
