Whether you are just starting to do your own reloading, or have been an expert for years, we have all the reloading supplies and equipment you will need. From reloading powder and reloading trays to reloading primers Fin Feather Fur Outfitters are a trusted online reloading supplies retailer. We offer top reloading brands at our ammo reloading store like Hornady and Lee Precision reloading products.
-
HORNADY
HORNADY 390570 SHELL HOLDER # 30
$7.99$7.19Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...
-
HORNADY
HORNADY 392159 CAM-LOCK BULLET PULLER COLLET #6 (284 CAL.)
$16.99$15.29Bullet puller collet for use with Hornady's Cam-Lock Bullet Puller. (part # 050095)INTENDED FOR RIFLE CARTRIDGES ONLY-DO NOT USE FOR PISTOL CARTRIDGES.
-
HORNADY
HORNADY 390554 SHELL HOLDER # 14
$7.99$7.19Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...
-
HORNADY
HORNADY 392156 CAM-LOCK BULLET PULLER COLLET #3 (243 CAL.)
$16.99$15.29Bullet puller collet for use with Hornady's Cam-Lock Bullet Puller. (part # 050095)INTENDED FOR RIFLE CARTRIDGES ONLY-DO NOT USE FOR PISTOL CARTRIDGES.
-
HORNADY
HORNADY 392601 SHELL PLATE # 1 (L-N-L AP PROGRESSIVE PRESS)
$48.99$44.09The Hornady Lock-N-Load AP Progressive Press Shellplate makes changing calibers a breeze on your Hornady Lock-N-Load Press and the older Hornady Projector Press. There is a shellplate available to fit almost every caliber. The shellplate numbers...
-
HORNADY
HORNADY 390946 CASE TRIMMER PILOT #4 .257'' (25 CAL.)
$8.99$8.09Hornady trimmer pilots are interchangeable in the Hornady Cam Lock Trimmer. Use our sizing charts to find the sizes you need.HORNADY TRIMMER PILOTS ALSO FIT FORSTER AND REDDING TRIMMERS
-
HORNADY
HORNADY 390542 SHELL HOLDER # 2
$7.99$7.19Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...
-
HORNADY
HORNADY 392158 CAM-LOCK BULLET PULLER COLLET #5 (277 CAL.)
$16.99$15.29Bullet puller collet for use with Hornady's Cam-Lock Bullet Puller. (part # 050095)INTENDED FOR RIFLE CARTRIDGES ONLY-DO NOT USE FOR PISTOL CARTRIDGES.
-
HORNADY
HORNADY 390545 SHELL HOLDER # 5
$7.99$7.19Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...
-
MTM
MTM RLLD-50-24 FLIP TOP 50 RD RIFLE
$5.99These are the newer CASE-GARD ammo boxes. Made of virtually indestructible polypropylene that will not warp, crack, chip, peel, expand or contract, MTM CASE-GARD rifle ammunition cases are still the first choice of rifle enthusiasts throughout the world...
-
MTM
MTM 22-HORN-10 FLIP TOP 50 RD RIFLE
$8.99These are the newer CASE-GARD ammo boxes. Made of virtually indestructible polypropylene that will not warp, crack, chip, peel, expand or contract, MTM CASE-GARD rifle ammunition cases are still the first choice of rifle enthusiasts throughout the world...
-
MEC
MEC 50278 CHARGE BAR 7/8 OZ. (LEAD PROGRESSIVE)
$29.99MEC is known for making high-quality, long-lasting shotshell presses that work great for beginning shotshell reloaders to the most advanced high-volume shotshell reloader. These quick-change charge bars are made from anodized aluminum and are for use...
-
MEC
MEC 5041 POWDER BUSHING - #41
$8.59These powder bushings fit all MEC charge bars made for interchangeable bushings. Please refer to a bushing chart to get the right size.Specifications and Features: Check your reloading manual or go to a powder manufactures website for load data.
-
CLAYBUSTER
CLAYBUSTER CB3118-12A WHITE 8 500 CT
$13.99CB3118-12A (White 8) (Reference data for Fig 8) For use in 1-1/8 to 1-1/4 oz. Trap, skeet, sporting clay or hunting loads. Performs best in tapered hulls, Remington or Winchester.Check your reloading manual or go to a powder manufactures website for load...
-
RCBS
RCBS 9577 PRIMER POCKET BRUSH-LARGE
$10.99$10.44A build-up of residue in primer pockets can cause misfires. A couple of twists with the RCBS Primer Pocket Brush easily cleans out residue. Removes residue in primer pockets with couple of twistsStainless bristles and interchangeable mounts
-
AOB
FRANKFORD 110006 Platinum Series Perfect Seat Hand Primer
$91.99The Frankford Arsenal Perfect Seat Hand Primer will make sure you do not over seat and crush a primer again. It features a dial that adjusts the seating depth .001 at a time with a total adjustment range of .05. Once you have the seating depth set, you...
-
HORNADY
HORNADY 546582 SERIES 2 3 DIE SET TITANIUM NITRIDE 45 COLT
$67.99$61.19The Hornady Custom Grade New Dimension 3-Die Set is a great die set for the avid reloader. The set includes CGND Full Length Sizer Die, CGND Expander Die, and CGND Seater Die. The Full Length Sizer Die features a Zip Spindle, with a series of light...
-
LEE PRECISION
LEE 90182 VERY LTD 4 DIE 450 BUSHMASTER SET
$56.99$54.14Lee Very Limited Production 450 Bushmaster PaceSetter 4-Die Set includes a Full Length Sizing Die, Powder Through Expanding Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions and...
-
CLAYBUSTER
CLAYBUSTER CB1075-20 20 GAUGE 3/4 OZ. 500 CT
$14.99CB1075-20 (3/4 oz. Wad). For use in 3/4 oz. skeet, sporting clays or hunting loads. Versatile for most hulls depending on powder volume.Specifications and Features: Check your reloading manual or go to a powder manufactures website for load data.
-
HORNADY
HORNADY 546300 SERIES 1 F.L. 2 DIE SET 270 WINCHESTER
$57.99$52.19The Hornady Custom Grade New Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a...
-
LEE PRECISION
LEE 90144 CASE LENGTH GAUGE & SHELL HOLDER 303 BRITISH
$7.99$7.59Lee 303 BRITISH Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim Trim to length 2.202 to 2.222 inches.Specifications and Features: Hardened Steel Gauge Threaded shell...
-
CLAYBUSTER
CLAYBUSTER CB1100-12 WAA12SL 500 CT
$13.99CB1100-12 (WAA12SL). For use in 7/8 to 1 oz. trap, skeet or sporting clay loads. Performs best in tapered hulls, Remington or Winchester.Specifications and Features: REPLACES WINCHESTER WAA12SL. Check your reloading manual or go to a powder manufactures...
-
LEE PRECISION
LEE 90105 223 DECAPPER
$4.99$4.74Replacement for DECAPPER & BASE .22 CALIBER (Part # 90103)
-
LEE PRECISION
LEE 90131 CASE LENGTH GAUGE & SHELL HOLDER 7MM REMINGTON MAGNUM
$7.99$7.59Lee 7MM REM MAG Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim Trim to length 2.480 to 2.500 inches.Specifications and Features: Hardened Steel Gauge Threaded shell...
-
LEE PRECISION
LEE 90001 PRESS SHELL HOLDER #14
$6.99$6.64Lee R14 Universal shell holder used in most brands of reloading presses.
-
LEE PRECISION
LEE 90142 CASE LENGTH GAUGE & SHELL HOLDER 300 WIN MAG
$7.99$7.59Lee 300 WIN MAG Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.600 to 2.620 inches.Specifications and Features: Hardened Steel Gauge Threaded shell...
-
LEE PRECISION
LEE 90161 CASE LENGTH GAUGE & SHELL HOLDER 44 MAGNUM
$7.99$7.59Lee 44 MAG Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.265 to 1.285 inches.Specifications and Features: Hardened Steel Gauge Threaded shell holder...
-
LEE PRECISION
LEE 90031 PRIMING TOOL SHELL HOLDER #21
$4.99$4.74Lee #21 Priming Tool shell holder used in Lee hand priming tools.
-
LEE PRECISION
LEE 90202 PRIMING TOOL SHELL HOLDER #2
$4.99$4.74Lee #2 Priming Tool shell holder used in Lee priming tools.
-
LYMAN
LYMAN 7821989 27-270 CAL TRIMMER PILOT
$8.99$8.54UNIV TRIMMER PILOT 27 CAL.For use in Lyman case trimmers
-
LYMAN
LYMAN 7832322 243 WIN CASE LENGTH/HEADSPACE GAUGE
$30.99$29.44To achieve the highest degree of safety and accuracy, Lyman recommends that all bottleneck rifle cases be inspected after resizing to ensure that the proper headspace dimension is maintained. The best way to check this critical dimension is with a Lyman...
-
RCBS
RCBS 90225 POWDER BAFFLE
$10.99$10.44Uniform loads require consistent powder charges, and many handloaders find a baffle helps them throw more consistent charges. This baffle is specifically designed for RCBS powder measures and provides handloaders a uniform powder flow by controlling the...
