-
RCBS
RCBS 99248 SHELL HOLDER #48
$10.99$10.44RCBS is known for making high-quality reloading equipment. Their shellholders are no different, they are made from high quality steel and will fit virtually any single stage reloading press. Fits: 338 Norma MagnumThese shell holders are also used with...
-
RCBS
RCBS 9430 BULLET PULLER COLLET 35/38 CAL
$17.99$17.09This collet is designed be used with the RCBS Standard Bullet puller to remove bullets from a wide range of cases.This 35/38 cal collet is for cartridges like 9MM, 38 Special, .357 Magnum, .358 Winchester etc.
-
RCBS
RCBS 20904 3-DIE SET .45-70 US GOVERNMENT
$78.99$75.04The 3-Die Roll Crimp Set is for loading straight-wall cartridges. Its steel Sizer Die sizes the case and de-primes. Note: Cases must be lubricated. The Expander Die expands the case to the proper diameter to accept the bullet, and it imparts case mouth...
-
RCBS
RCBS 9608 DECAPPING PIN 5-PACK SMALL
$5.99$5.69For older dies that use a decapping pin without a head. Check what type pin your die uses before ordering. (large pins are black and small pins are silver)
-
LEE PRECISION
LEE 90817 FACTORY CRIMP DIE 223 REMINGTON
$15.99$15.19Lee 223 Remington Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a...
-
HORNADY
HORNADY A300A L-N-L MODIFIED CASE 300 BLACKOUT
$9.99$8.99Lock-N-Load Modified Cases are readily available to fit most popular rifle chambers. All are manufactured to SAAMI specs. To be used with O.A.L. gauges part numbers C1000 or C1550.HORNADY PART NUMBER C1000 IS A STRAIGHT OVER ALL LENGTH GAUGE AND C1550 IS...
-
HORNADY
HORNADY 546349 SERIES 1 F.L. 2 DIE SET 300 BLACKOUT
$57.99$52.19The Hornady Custom Grade New Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a...
-
HORNADY
HORNADY C1000 LOCK-N-LOAD� OAL GAUGE STRAIGHT
$44.99$40.49For all bolt-action and single-shot firearms, or any firearm with straight-line access to the chamber. This model is preferred, as it is most precise and user friendly.CALIPERS, MODIFIED CASES AND BULLET COMPARATORS ARE NOT INCLUDED
-
RCBS
RCBS 9812 EXP-DECAPPING UNIT .30
$13.99$13.29This unit features an expander rod and ball and a decapping pin. It s used with sizing dies to de-prime the case and expand the neck in bottleneck cartridges.
-
RCBS
RCBS 9086 POWDER FUNNEL .17-.20 CAL.
$10.99$10.44The RCBS Powder Funnel for 17 to 20 caliber cases is ideal for reloaders who are reloading this small caliber rounds. The drop tube was specially designed to avoid messy powder spills around the case mouth while the measure features a non-stick,...
-
RCBS
RCBS 9394 CT PILOT .44 CALIBER (430)
$8.99$8.54RCBS Case Trimmer Pilots are tapered to guide pilot into the case mouth. The design prevents a case from wobbling when being trimmed to length. For use with RCBS Trim Pro Case Trimmers, Rotary Case Trimmer2 and Rotary Case Trimmer. For use with RCBS Case...
-
RCBS
RCBS 90201 UNIVERSAL HAND PRIMING TOOL
$87.99$83.59The Universal Hand Priming tool combines the universal shell holder from the APS tool with the primer tray from the standard tool to offer unmatched performance. The universal shell holder accept cases from .22 Hornet to .45-70 Government. The safety...
-
RCBS
RCBS 9201 SHELL HOLDER #1
$10.99$10.44RCBS is known for making high-quality reloading equipment. Their shellholders are no different, they are made from high quality steel and will fit virtually any single stage reloading press. Fits: .218 Bee.25/20 Winchester.32/20 Winchester8mm Lebel...
-
RCBS
RCBS 87585 DECAP DIE .27 THRU .45 CAL, HD
$30.99$29.44Use RCBS Decapping dies to quickly remove primers from cases prior to cleaning.Specifications and Features: Shell holders are not included with this die.
-
LEE PRECISION
LEE 90521 PRESS SHELL HOLDER #4
$6.99$6.64Lee R4 Universal shell holder used in most brands of reloading presses.
-
LEE PRECISION
LEE 90292 DECAPPING DIE
$15.99$15.19An absolute must for those who clean cases before reloading. Cases need not be clean nor lubed when using this die. Cases are not sized at all, only deprimed. Works on boxer-primed brass only. Fits cases up to .560" in diameter and up to 3.125" long.
-
LEE PRECISION
LEE 90269 4 HOLE TURRET (ONLY)
$13.99$13.29Lee Aluminum 4-Hole Turret for quick caliber change for the 4-Hole Turret Press and Classic Turret Press. This 4 Hole Turret will not fit inside the Pro 1000 or now discontinued 3-Hole Turret Press.
-
LYMAN
LYMAN 7810220 CASE PREP XPRESS
$205.99$195.69The Case Prep Xpress is the only "All-Inclusive" System offering all the most popular case prep accessories driven by a high torque gear motor. The dump pan provides easy clean up of brass shavings. The best part is that all accessories are included from...
-
RCBS
RCBS 9315 CASE SLICK SPRAY LUBE
$14.99$14.24Case Slick is an exclusive formulation that provides exceptional lubricity for resizing or forming of metallic rifle and pistol cases. Testing reveals Case Slick reduces the force needed to resize 308 Win. cases 35 percent to 70 percent when compared to...
-
RCBS
RCBS 87507 DIE LOCK RING 7/8-14 5-PACK
$18.99$18.04These steel locking rings allow a reloader to set up dies and lock them in place so they can be removed and replaced without having to recalibrate. They fit on standard 7/8-inch-14 threaded dies.
-
LYMAN
LYMAN 9817004 CAST BULLET HAND BOOK 4TH ED
$27.99$26.59The most comprehensive cast bullet data manual using the latest and most available components for bullet casters. In addition to data for Lyman s entire line of rifle and pistol moulds, the Cast Bullet Handbook includes data for selected moulds from...
-
HORNADY
HORNADY 050129 PISTOL MICROMETER METERING INSERT
$50.99$45.89The Hornady Lock-N-Load Powder Measure Handgun Micrometer is the perfect accessory for the reloader looking to throw very small and very precise powder charges from the Lock-N-Load powder measure. The etched marks allow the reloader to dial in the exact...
-
HORNADY
HORNADY 050095 CAM-LOCK BULLET PULLER
$38.99$35.09The fastest, easiest way to pull bullets with your press. Just clamp on the bullet, pull down on the handle and the bullet is removed. INTENDED FOR RIFLE CARTRIDGES ONLY-DO NOT USE FOR PISTOL CARTRIDGES. Uses collets, sold separately.
-
HORNADY
HORNADY 050173 4 BLADE OUTSIDE DIAMETER DEBURRING TOOL (8-32 THREAD)
$21.99$19.79Designed to remove the burrs from the outside of a case mouth. Made In United States of Americawarning-icon WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive...
-
HORNADY
HORNADY 095340 LOCK-N-LOAD AP RIFLE BULLET FEEDER 22 CAL.
$589.99$530.99The Hornady Lock-N-Load Progressive Progressive Press Rifle Bullet Feeder Kit is sold as a complete unit for 22 caliber bullets, a conversion kit for 30 caliber bullets is also available, giving the reloader the versatility to load the two most popular...
-
RCBS
RCBS 11201 F L DIE SET 224 VALKYRIE
$95.99$91.19This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...
-
RCBS
RCBS 32901 F L DIE SET 6.5 CREEDMOOR
$53.99$51.29This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...
-
HORNADY
HORNADY 390584 SHELL HOLDER # 44
$7.99$7.19Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...
-
HORNADY
HORNADY 390602 SHELL HOLDER # 46
$7.99$7.19Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...
-
HORNADY
HORNADY 392608 SHELL PLATE # 8 (L-N-L AP PROGRESSIVE PRESS)
$48.99$44.09The Hornady Lock-N-Load AP Progressive Press Shellplate makes changing calibers a breeze on your Hornady Lock-N-Load Press and the older Hornady Projector Press. There is a shellplate available to fit almost every caliber. The shellplate numbers...
-
HORNADY
HORNADY 390570 SHELL HOLDER # 30
$7.99$7.19Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...
-
HORNADY
HORNADY 392159 CAM-LOCK BULLET PULLER COLLET #6 (284 CAL.)
$16.99$15.29Bullet puller collet for use with Hornady's Cam-Lock Bullet Puller. (part # 050095)INTENDED FOR RIFLE CARTRIDGES ONLY-DO NOT USE FOR PISTOL CARTRIDGES.
Most Orders Placed Before 1pm EST Ship Same Day
