-
LYMAN
LYMAN 7750725 POCKET TOUCH SCALE KIT 1500 SCALE
$39.99$37.99The Pocket-Touch 1500 offers full size performance in a very compact, portable design. The scale is just 2 x 4 x yet provides advanced touch screen controls and a full 1500 grain capacity. The scale comes with our patented Universal Funnel Pan, powder...
-
RCBS
RCBS 9087 POWDER FUNNEL .22-.50 CAL
$9.99$9.49RCBS has improved upon even the basic plastic funnel. It features a specially designed drop tube to avoid any messy powder spills around case mouths, a non-stick, anti-static surface, and a square lip to keep the funnel from rolling around. Spout will...
-
RCBS
RCBS 10301 F L DIE SET .204 RUGER
$53.99$51.29This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...
-
HORNADY
HORNADY 044000 SURE-LOC LOCK RING (1 PK)
$6.99$6.29The Hornady Sure-Loc Die Locking Ring is a terrific addition to any 7/8"-14 threaded die. The split ring design ensures the tightened screw never touches the threads and cannot damage the die. The Locking Ring applies constant pressure across the threads...
-
HORNADY
HORNADY 044096 LOCK-N-LOAD DIE BUSHING (10 PK)
$67.99$61.19The Hornady Lock-N-Load Die Bushing is a great way to get the most out of your Lock-N-Load press. The unique Die Bushing allows dies to be changed with a flick of the wrist. Simply insert the die into a Lock-N-Load bushing, place the bushing in the...
-
BULLDOG CASES
Bulldog Cases Pinnacle Rifle Case Mossy Oak with Black Trim 44 Inch, BD205
$51.99$45.992.25 inches total soft padding. Full-length zipper with pull. Soft laminated fur inner lining for maximum protection. Durable extra heavy-duty nylon water-resistant outer shell. Removable adjustable shoulder strap with swivels. Raised rib panels for...
-
HORNADY
HORNADY 392370 SPRING CASE RETAINER LOCK-N-LOAD AP PRESS (3 PK)
$11.99$10.79The Hornady Lock-N-Load AP Progressive Press Case Retainer Spring is a handy replacement part for your Lock-N-Load AP press. One of the features that makes the Hornady Lock-N-Load AP an exceptional value is the ability to quickly and easily remove and...
-
SIERRA BULLETS
SIERRA 6TH EDITION RIFLE & HANDGUN RELOADING MANUAL
$48.99$46.54This 1,368 page manual retains the popular three-ring binder format and contains cartridge information, histories, and reloading recommendations, a necessity in every reloader s library. The sections include: a complete glossary of ballistic, reloading...
-
HORNADY
HORNADY 390541 SHELL HOLDER # 1
$7.99$7.19Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...
-
RCBS
RCBS 18212 3-DIE CARBIDE DIE SET 38 SPECIAL/.357 MAGNUM/.357 MAXIMUM
$95.99$91.19RCBS pioneered and developed 3-Die Sets for straight-wall pistol cases. The Carbide Sizer Die sizes the case and de-primes (the carbide sizer ring eliminates the need to lubricate). The Expander Die expands the case to the proper diameter to accept the...
-
HORNADY
HORNADY 050303 ONE SHOT TUMBLER MEDIA COB
$20.99$18.89Hornady One Shot case tumbling media was engineered as an abrasive media to remove tarnish and other residues from cartridge cases before reloading. Dirt and grime that is left on cartridge cases can prematurely wear out reloading equipment so it is a...
-
LYMAN
LYMAN 7777760 FLASH HOLE UNIFORMING TOOL
$20.99$19.94This handy tool removes internal flash hole burrs. Features a tool steel cutter which is inserted into the flash hole through the case neck. Adjustable stop collar allows use with any size case. Burrs are removed with a clockwise turn. Fits .22 to .45...
-
RCBS
RCBS 9219 SHELL HOLDER #19
$10.99$10.44RCBS is known for making high-quality reloading equipment. Their shellholders are no different, they are made from high quality steel and will fit virtually any single stage reloading press. Fits:25 Remington30 Remington6.8 RemingtonThese shell holders...
-
RCBS
RCBS 9412 POW'R PULL II BULLET PULLER
$30.99$29.44Get yourself out a jam with the RCBS Pow r Pull Kit. This kinetic-style bullet puller s rugged one-piece body and user-friendly ergonomic handle resolves mistakes quickly and easily. The three case holding chucks will accommodate cases from 5.7x28mm and ...
-
RCBS
RCBS 9356 ROCK CHUCKER SUPREME PRESS
$239.99$227.99The Rock Chucker Supreme press has been lengthened to allow easy loading of today s longer cartridge designs. With easy operation, ambidextrous handle, outstanding strength and versatility, the Rock Chucker Supreme is ideal for beginners and pros alike...
-
RCBS
RCBS 16601 F L DIE SET .338 LAPUA
$53.99$51.29This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...
-
RCBS
RCBS 9436 BULLET PULLER COLLET 45 CAL
$17.99$17.09This collet is designed be used with the RCBS Standard Bullet puller to remove bullets from a wide range of cases.This 45 cal collet is for cartridges like .45 ACP, 45 Colt, 450 Bushmaster, 45-70 etc.
-
RCBS
RCBS 99248 SHELL HOLDER #48
$10.99$10.44RCBS is known for making high-quality reloading equipment. Their shellholders are no different, they are made from high quality steel and will fit virtually any single stage reloading press. Fits: 338 Norma MagnumThese shell holders are also used with...
-
RCBS
RCBS 9430 BULLET PULLER COLLET 35/38 CAL
$17.99$17.09This collet is designed be used with the RCBS Standard Bullet puller to remove bullets from a wide range of cases.This 35/38 cal collet is for cartridges like 9MM, 38 Special, .357 Magnum, .358 Winchester etc.
-
RCBS
RCBS 20904 3-DIE SET .45-70 US GOVERNMENT
$78.99$75.04The 3-Die Roll Crimp Set is for loading straight-wall cartridges. Its steel Sizer Die sizes the case and de-primes. Note: Cases must be lubricated. The Expander Die expands the case to the proper diameter to accept the bullet, and it imparts case mouth...
-
RCBS
RCBS 9608 DECAPPING PIN 5-PACK SMALL
$5.99$5.69For older dies that use a decapping pin without a head. Check what type pin your die uses before ordering. (large pins are black and small pins are silver)
-
LEE PRECISION
LEE 90817 FACTORY CRIMP DIE 223 REMINGTON
$15.99$15.19Lee 223 Remington Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a...
-
HORNADY
HORNADY 546349 SERIES 1 F.L. 2 DIE SET 300 BLACKOUT
$57.99$52.19The Hornady Custom Grade New Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a...
-
RCBS
RCBS 9812 EXP-DECAPPING UNIT .30
$13.99$13.29This unit features an expander rod and ball and a decapping pin. It s used with sizing dies to de-prime the case and expand the neck in bottleneck cartridges.
-
RCBS
RCBS 9086 POWDER FUNNEL .17-.20 CAL.
$10.99$10.44The RCBS Powder Funnel for 17 to 20 caliber cases is ideal for reloaders who are reloading this small caliber rounds. The drop tube was specially designed to avoid messy powder spills around the case mouth while the measure features a non-stick,...
-
HORNADY
HORNADY A3006 L-N-L MODIFIED CASE 30-06 SPRINGFIELD
$9.99$8.99Lock-N-Load Modified Cases are readily available to fit most popular rifle chambers. All are manufactured to SAAMI specs. To be used with O.A.L. gauges part numbers C1000 or C1550.HORNADY PART NUMBER C1000 IS A STRAIGHT OVER ALL LENGTH GAUGE AND C1550 IS...
-
RCBS
RCBS 9394 CT PILOT .44 CALIBER (430)
$8.99$8.54RCBS Case Trimmer Pilots are tapered to guide pilot into the case mouth. The design prevents a case from wobbling when being trimmed to length. For use with RCBS Trim Pro Case Trimmers, Rotary Case Trimmer2 and Rotary Case Trimmer. For use with RCBS Case...
-
RCBS
RCBS 90201 UNIVERSAL HAND PRIMING TOOL
$87.99$83.59The Universal Hand Priming tool combines the universal shell holder from the APS tool with the primer tray from the standard tool to offer unmatched performance. The universal shell holder accept cases from .22 Hornet to .45-70 Government. The safety...
-
RCBS
RCBS 9201 SHELL HOLDER #1
$10.99$10.44RCBS is known for making high-quality reloading equipment. Their shellholders are no different, they are made from high quality steel and will fit virtually any single stage reloading press. Fits: .218 Bee.25/20 Winchester.32/20 Winchester8mm Lebel...
-
RCBS
RCBS 87585 DECAP DIE .27 THRU .45 CAL, HD
$30.99$29.44Use RCBS Decapping dies to quickly remove primers from cases prior to cleaning.Specifications and Features: Shell holders are not included with this die.
-
LEE PRECISION
LEE 90521 PRESS SHELL HOLDER #4
$6.99$6.64Lee R4 Universal shell holder used in most brands of reloading presses.
-
LEE PRECISION
LEE 90292 DECAPPING DIE
$15.99$15.19An absolute must for those who clean cases before reloading. Cases need not be clean nor lubed when using this die. Cases are not sized at all, only deprimed. Works on boxer-primed brass only. Fits cases up to .560" in diameter and up to 3.125" long.
Most Orders Placed Before 1pm EST Ship Same Day
