-
HORNADY
HORNADY 390946 CASE TRIMMER PILOT #4 .257'' (25 CAL.)
$8.99$8.54Hornady trimmer pilots are interchangeable in the Hornady Cam Lock Trimmer. Use our sizing charts to find the sizes you need.HORNADY TRIMMER PILOTS ALSO FIT FORSTER AND REDDING TRIMMERS
-
HORNADY
HORNADY 390542 SHELL HOLDER # 2
$7.99$7.59Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...
-
HORNADY
HORNADY 392158 CAM-LOCK BULLET PULLER COLLET #5 (277 CAL.)
$16.99$16.14Bullet puller collet for use with Hornady's Cam-Lock Bullet Puller. (part # 050095)INTENDED FOR RIFLE CARTRIDGES ONLY-DO NOT USE FOR PISTOL CARTRIDGES.
-
HORNADY
HORNADY 390545 SHELL HOLDER # 5
$7.99$7.59Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...
-
CLAYBUSTER
CLAYBUSTER CB3118-12A WHITE 8 500 CT
$13.99$13.29CB3118-12A (White 8) (Reference data for Fig 8) For use in 1-1/8 to 1-1/4 oz. Trap, skeet, sporting clay or hunting loads. Performs best in tapered hulls, Remington or Winchester.Check your reloading manual or go to a powder manufactures website for load...
-
RCBS
RCBS 9577 PRIMER POCKET BRUSH-LARGE
$10.99$10.44A build-up of residue in primer pockets can cause misfires. A couple of twists with the RCBS Primer Pocket Brush easily cleans out residue. Removes residue in primer pockets with couple of twistsStainless bristles and interchangeable mounts
-
HORNADY
HORNADY 546582 SERIES 2 3 DIE SET TITANIUM NITRIDE 45 COLT
$67.99$64.59The Hornady Custom Grade New Dimension 3-Die Set is a great die set for the avid reloader. The set includes CGND Full Length Sizer Die, CGND Expander Die, and CGND Seater Die. The Full Length Sizer Die features a Zip Spindle, with a series of light...
-
CLAYBUSTER
CLAYBUSTER CB1075-20 20 GAUGE 3/4 OZ. 500 CT
$14.99$14.24CB1075-20 (3/4 oz. Wad). For use in 3/4 oz. skeet, sporting clays or hunting loads. Versatile for most hulls depending on powder volume.Specifications and Features: Check your reloading manual or go to a powder manufactures website for load data.
-
HORNADY
HORNADY 546300 SERIES 1 F.L. 2 DIE SET 270 WINCHESTER
$57.99$55.09The Hornady Custom Grade New Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a...
-
LEE PRECISION
LEE 90144 CASE LENGTH GAUGE & SHELL HOLDER 303 BRITISH
$7.99$7.59Lee 303 BRITISH Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim Trim to length 2.202 to 2.222 inches.Specifications and Features: Hardened Steel Gauge Threaded shell...
-
CLAYBUSTER
CLAYBUSTER CB1100-12 WAA12SL 500 CT
$13.99$13.29CB1100-12 (WAA12SL). For use in 7/8 to 1 oz. trap, skeet or sporting clay loads. Performs best in tapered hulls, Remington or Winchester.Specifications and Features: REPLACES WINCHESTER WAA12SL. Check your reloading manual or go to a powder manufactures...
-
LEE PRECISION
LEE 90105 223 DECAPPER
$4.99$4.74Replacement for DECAPPER & BASE .22 CALIBER (Part # 90103)
-
LEE PRECISION
LEE 90131 CASE LENGTH GAUGE & SHELL HOLDER 7MM REMINGTON MAGNUM
$7.99$7.59Lee 7MM REM MAG Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim Trim to length 2.480 to 2.500 inches.Specifications and Features: Hardened Steel Gauge Threaded shell...
-
LEE PRECISION
LEE 90001 PRESS SHELL HOLDER #14
$6.99$6.64Lee R14 Universal shell holder used in most brands of reloading presses.
-
LEE PRECISION
LEE 90142 CASE LENGTH GAUGE & SHELL HOLDER 300 WIN MAG
$7.99$7.59Lee 300 WIN MAG Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.600 to 2.620 inches.Specifications and Features: Hardened Steel Gauge Threaded shell...
-
HORNADY
HORNADY 6400 00 BUCKSHOT .330 DIAMETER 5 LB. BOX
$39.99$37.99Hornady Buckshot is cold swaged using a lead alloy hardened with antimony to prevent any potential deformities when fired. This allows the buckshot to fly straighter and to hit your target harder. Hornady uses a strict roundness tolerance of +0.001" in...
-
LEE PRECISION
LEE 90161 CASE LENGTH GAUGE & SHELL HOLDER 44 MAGNUM
$7.99$7.59Lee 44 MAG Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.265 to 1.285 inches.Specifications and Features: Hardened Steel Gauge Threaded shell holder...
-
LEE PRECISION
LEE 90031 PRIMING TOOL SHELL HOLDER #21
$4.99$4.74Lee #21 Priming Tool shell holder used in Lee hand priming tools.
-
LYMAN
LYMAN 7821989 27-270 CAL TRIMMER PILOT
$8.99$8.54UNIV TRIMMER PILOT 27 CAL.For use in Lyman case trimmers
-
LYMAN
LYMAN 7832322 243 WIN CASE LENGTH/HEADSPACE GAUGE
$30.99$29.44To achieve the highest degree of safety and accuracy, Lyman recommends that all bottleneck rifle cases be inspected after resizing to ensure that the proper headspace dimension is maintained. The best way to check this critical dimension is with a Lyman...
-
RCBS
RCBS 90225 POWDER BAFFLE
$10.99$10.44Uniform loads require consistent powder charges, and many handloaders find a baffle helps them throw more consistent charges. This baffle is specifically designed for RCBS powder measures and provides handloaders a uniform powder flow by controlling the...
-
LYMAN
LYMAN 7631375 ROTARY CASE STAINLESS MEDIA
$59.99$56.99Rotary case tumbling provides a real advantage over other methods of case cleaning as the stainless steel media pins are able to get into areas that other media such as corn cob or nut shell simply cannot reach. Areas such as primer pockets and the...
-
LYMAN
LYMAN 7822004 41-41 MAG TRIMMER PILOT
$8.99$8.54UNIV TRIMMER PILOT 41 CAL.For use in Lyman case trimmers
-
TROPHY ROCK
Trophy Rock All Natural Mineral Lick Rock For Deer 12 Pounds, T50250
$15.99$13.99An all-natural trace-mineral rock mined in the Rocky Mountains. Contains more than 65 trace minerals including sodium, calcium and potassium that are beneficial to antler growth and overall herd health. Attracts elk, moose, bison, deer, antelope, sheep...
-
LYMAN
LYMAN 7832331 45 A.C.P. (45 AUTO) PISTOL MAX GAUGE
$25.99$24.69Lyman maximum cartridge gauges check all critical dimensions of pistol ammunition to insure proper functioning. These precision made gauges allow the reloader to check the case length, diameter and overall cartridge length of pistol ammunition. This...
-
LYMAN
LYMAN 7821997 9MM-LUGER TRIMMER PILOT
$8.99$8.54UNIV TRIMMER PILOT 35 CAL.For use in Lyman case trimmers
-
LEE PRECISION
LEE 90102 30 CAL. DECAPPER AND BASE
$7.99$7.59Lee Easily removes crimped in primers from military cases
-
LEE PRECISION
LEE 90126 CASE LENGTH GAUGE & SHELL HOLDER 6.5X55 SWEDISH MAUSER
$7.99$7.59Lee 6.5X55 SWED case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.145 to 2.165 inches.Specifications and Features: Hardened Steel Gauge Threaded shell...
-
HORNADY
HORNADY 044093 LOCK-N-LOAD DIE BUSHING (3 PK)
$24.99$23.74The Hornady Lock-N-Load Die Bushing is a great way to get the most out of your Lock-N-Load press. The unique Die Bushing allows dies to be changed with a flick of the wrist. Simply insert the die into a Lock-N-Load bushing, place the bushing in the...
-
LEE PRECISION
LEE 90786 TAPER CRIMP DIE 45 COLT
$12.99$12.34Lee 45 Colt/454 Casull Taper Crimp Die, overcomes crimp problems caused by poor die design. Offers little or no advantage when used with 1986 or newer Lee Dies as the crimp angle is already a modified taper crimp
-
LEE PRECISION
LEE 90794 XR/ERGO TRAY UPDATE
$12.99$12.34New style Small and Large Adapters and one Folding Primer Tray [patent pending]. Compatible with the Ergo Prime and Auto Prime XR. This Update Kit will not work on the original Auto Prime tool with round trays.
-
LEE PRECISION
LEE 90600 BREECH LOCK BUSHING 2-PK
$14.99$14.24Pack of (2) Breech Lock Quick Change Bushings. Allows instant, accurate die changes. Perfect with Lee Lock Rings
Most Orders Placed Before 1pm EST Ship Same Day
